| Message ID | 6b0922a66f55d5fe2f2d8fdaf5f48a57245d0aec.1690602767.git.atai@atai.org |
|---|---|
| State | New |
| Headers | show |
| Series | [bug#64261,v5,1/2] gnu: Add xrdp | expand |
Hi Andy,
LGTM, but on current ‘master’ I get:
--8<---------------cut here---------------start------------->8---
configure: imlib2 will not be supported
checking for security/pam_appl.h... yes
checking for FUSE... no
configure: error: please install libfuse-dev or fuse-devel
error: in phase 'configure': uncaught exception:
%exception #<&invoke-error program: "/gnu/store/rib9g2ig1xf3kclyl076w28parmncg4k-bash-minimal-5.1.16/bin/bash" arguments: ("./configure" "CONFIG_SHELL=/gnu/store/rib9g2ig1xf3kclyl076w28parmncg4k-bash-minimal-5.1.16/bin/bash" "SHELL=/gnu/store/rib9g2ig1xf3kclyl076w28parmncg4k-bash-minimal-5.1.16/bin/bash" "--prefix=/gnu/store/54a1c7ar3hhbyncf5g6s4nndy3bwxssq-xrdp-0.9.22.1" "--enable-fast-install" "--build=x86_64-unknown-linux-gnu" "--enable-strict-locations=yes" "--enable-fuse=yes" "--enable-mp3lame=yes" "--enable-pixman=yes" "--enable-imlib2=yes" "--enable-pam-config=unix" "--enable-ipv6=yes") exit-status: 1 term-signal: #f stop-signal: #f>
phase `configure' failed after 4.2 seconds
command "/gnu/store/rib9g2ig1xf3kclyl076w28parmncg4k-bash-minimal-5.1.16/bin/bash" "./configure" "CONFIG_SHELL=/gnu/store/rib9g2ig1xf3kclyl076w28parmncg4k-bash-minimal-5.1.16/bin/bash" "SHELL=/gnu/store/rib9g2ig1xf3kclyl076w28parmncg4k-bash-minimal-5.1.16/bin/bash" "--prefix=/gnu/store/54a1c7ar3hhbyncf5g6s4nndy3bwxssq-xrdp-0.9.22.1" "--enable-fast-install" "--build=x86_64-unknown-linux-gnu" "--enable-strict-locations=yes" "--enable-fuse=yes" "--enable-mp3lame=yes" "--enable-pixman=yes" "--enable-imlib2=yes" "--enable-pam-config=unix" "--enable-ipv6=yes" failed with status 1
builder for `/gnu/store/szpyq693qdj51f0444jjvgl4afl8ffv6-xrdp-0.9.22.1.drv' failed with exit code 1
build of /gnu/store/szpyq693qdj51f0444jjvgl4afl8ffv6-xrdp-0.9.22.1.drv failed
--8<---------------cut here---------------end--------------->8---
Could you take a look?
Ludo’.
OK, will check... the patch may be out of date now with resp. to current guix git. On Mon, Aug 7, 2023 at 6:27 AM Ludovic Courtès <ludo@gnu.org> wrote: > > Hi Andy, > > LGTM, but on current ‘master’ I get: > > --8<---------------cut here---------------start------------->8--- > configure: imlib2 will not be supported > checking for security/pam_appl.h... yes > checking for FUSE... no > configure: error: please install libfuse-dev or fuse-devel > error: in phase 'configure': uncaught exception: > %exception #<&invoke-error program: "/gnu/store/rib9g2ig1xf3kclyl076w28parmncg4k-bash-minimal-5.1.16/bin/bash" arguments: ("./configure" "CONFIG_SHELL=/gnu/store/rib9g2ig1xf3kclyl076w28parmncg4k-bash-minimal-5.1.16/bin/bash" "SHELL=/gnu/store/rib9g2ig1xf3kclyl076w28parmncg4k-bash-minimal-5.1.16/bin/bash" "--prefix=/gnu/store/54a1c7ar3hhbyncf5g6s4nndy3bwxssq-xrdp-0.9.22.1" "--enable-fast-install" "--build=x86_64-unknown-linux-gnu" "--enable-strict-locations=yes" "--enable-fuse=yes" "--enable-mp3lame=yes" "--enable-pixman=yes" "--enable-imlib2=yes" "--enable-pam-config=unix" "--enable-ipv6=yes") exit-status: 1 term-signal: #f stop-signal: #f> > phase `configure' failed after 4.2 seconds > command "/gnu/store/rib9g2ig1xf3kclyl076w28parmncg4k-bash-minimal-5.1.16/bin/bash" "./configure" "CONFIG_SHELL=/gnu/store/rib9g2ig1xf3kclyl076w28parmncg4k-bash-minimal-5.1.16/bin/bash" "SHELL=/gnu/store/rib9g2ig1xf3kclyl076w28parmncg4k-bash-minimal-5.1.16/bin/bash" "--prefix=/gnu/store/54a1c7ar3hhbyncf5g6s4nndy3bwxssq-xrdp-0.9.22.1" "--enable-fast-install" "--build=x86_64-unknown-linux-gnu" "--enable-strict-locations=yes" "--enable-fuse=yes" "--enable-mp3lame=yes" "--enable-pixman=yes" "--enable-imlib2=yes" "--enable-pam-config=unix" "--enable-ipv6=yes" failed with status 1 > builder for `/gnu/store/szpyq693qdj51f0444jjvgl4afl8ffv6-xrdp-0.9.22.1.drv' failed with exit code 1 > build of /gnu/store/szpyq693qdj51f0444jjvgl4afl8ffv6-xrdp-0.9.22.1.drv failed > --8<---------------cut here---------------end--------------->8--- > > Could you take a look? > > Ludo’.
diff --git a/gnu/packages/rdesktop.scm b/gnu/packages/rdesktop.scm index be4fe83cdc..04d3db610d 100644 --- a/gnu/packages/rdesktop.scm +++ b/gnu/packages/rdesktop.scm @@ -31,19 +31,29 @@ (define-module (gnu packages rdesktop) #:use-module (guix utils) #:use-module (guix build-system cmake) #:use-module (guix build-system gnu) + #:use-module (gnu packages assembly) + #:use-module (gnu packages autotools) + #:use-module (gnu packages bison) + #:use-module (gnu packages check) #:use-module (gnu packages compression) #:use-module (gnu packages cups) #:use-module (gnu packages docbook) + #:use-module (gnu packages flex) #:use-module (gnu packages freedesktop) + #:use-module (gnu packages gettext) #:use-module (gnu packages glib) #:use-module (gnu packages gstreamer) #:use-module (gnu packages image) #:use-module (gnu packages libusb) #:use-module (gnu packages linux) + #:use-module (gnu packages mp3) #:use-module (gnu packages nettle) #:use-module (gnu packages pkg-config) + #:use-module (gnu packages python) + #:use-module (gnu packages python-xyz) #:use-module (gnu packages pulseaudio) #:use-module (gnu packages tls) + #:use-module (gnu packages version-control) #:use-module (gnu packages video) #:use-module (gnu packages xdisorg) #:use-module (gnu packages xorg) @@ -137,3 +147,69 @@ (define-public freerdp functionality, and Windows Portable Runtime (WinPR), a portable implementation of parts of the Windows API.") (license license:asl2.0))) + +(define-public xrdp + (package + (name "xrdp") + (version "0.9.22.1") + (source (origin + (method url-fetch) + (uri (string-append + "https://github.com/neutrinolabs/xrdp/releases/download/v" + version "/xrdp-" version ".tar.gz")) + (sha256 + (base32 + "1jzknwy003fk5lqzrncbypirq3smpghxy2prg2m2ljjrx77j1lvd")))) + (build-system gnu-build-system) + (inputs (list check + fuse + imlib2 + lame + libjpeg-turbo + libx11 + libxfixes + libxml2 + libxpm + libxrandr + libxslt + libxt + linux-pam + openssl + pixman + python + python-libxml2)) + (native-inputs (list autoconf + automake + libtool + bison + flex + gettext-minimal + intltool + nasm + pkg-config + pixman)) + + (arguments + (list #:configure-flags #~(list "--enable-strict-locations=yes" + "--enable-fuse=yes" + "--enable-mp3lame=yes" + "--enable-pixman=yes" + "--enable-imlib2=yes" + "--enable-pam-config=unix" + "--enable-ipv6=yes"))) + (home-page "https://www.xrdp.org") + (synopsis "Remote Desktop Protocol (RDP) server") + (description + "Xrdp provides a graphical login to remote machines using +Microsoft Remote Desktop Protocol (RDP). Xrdp accepts connections from a +variety of RDP clients: +@itemize +@item FreeRDP +@item rdesktop +@item KRDC +@item NeutrinoRDP +@item Windows MSTSC (Microsoft Terminal Services Client, aka mstsc.exe) +@item Microsoft Remote Desktop (found on Microsoft Store, which is distinct from MSTSC). +@end itemize") + (license license:asl2.0))) +